Vivo Y11 2019 PD1930F Flash File (Stock ROM)

Vivo Y11 2019 PD1930F Flash file can be used fix hang on logo ,Bootloop issue , Dead issue, Auto fastboot mode and recovery mode and other software issue. Always use latest version flash file to flash Vivo Y11 2019 and read all flashing instructions before flashing the phone. Download full flash file, flash tool and drivers by link given below.

Download Vivo Y11 2019 PD1930F Flash File:

PD1930F_EX_A_6.71.3_vivo_qcom — Google Drive Link
PD1930F_EX_A_6.71.2_vivo_qcom — Google Drive Link
PD1930F_EX_A_1.70.10_vivo_qcom — Google Drive Link
QPST Flash Tool
Vivo Y11 2019 Driver (Password : gsmmafia)
WhatsApp me for flashing +917017426154

Pre-requisites before flashing Vivo Y11 2019 PD1930F

Battery should be charged up to 70%
Make sure you have Vivo USB OG Cable
Download and install QPST Tool in PC (Recommended: QCfire, Unlocktool, EMT Tool, MRT)
Download And install drivers in your pc

How to Flash Vivo Y11 2019 PD1930F:
Recommended tool to use for flash this device : QCfire, Unlocktool, EMT tool, Miracle, MRT

Download and install Qualcomm driver in your computer. if in case Qualcomm drivers are already installed on the computer, skip the step.
Download and extract Flash file
Download, Install and run QPST Flash Tool
Connect Phone in EDL Mode by shorting EDL points
Add Port in QPST Tool
Click on Load XML and select rawprogram_unsparse.xml from stock rom folder
Click on Load Patch and select patch0.xml from stock rom folder
Click on Download Button and wait for flash finish
All Done.
Note: If your device is not connecting to pc then download the driver from above and install in your pc.

WhatsApp me if you having any issue +917017426154

If you facing any problem in file or flashing your device, Contact us here